4/2/2023 0 Comments Soundstream st4.1000d![]() Don't mount the amplifier so that the wire connections are unprotected or are subject to pinching or damage from nearby objects.Try to avoid mounting the amplifier on a subwoofer enclosure, as extended exposure to vibration may cause malfunction of the amplifier.Upside down mounting will compromise heat dissipation through the heatsink and could engage the thermal protection circuit.For alternate installation locations, please consult your dealer. The best places to mount your amplifier are: The floor of the trunk, under the driver's seat, or on the back of the rear seat. The amplifier should be protected from exposure to moisture and direct sunlight. Use caution to make sure there are no objects behind the installation surface that may become damaged during drilling. Once the feet are in place, use the amplifier as a template and mark the four screw locations. Your MICRO MINI amplifier comes with mounting feet that need to be attached to the amplifier prior to installation. Be sure that the power and signal cable connections can enter and leave the amplifier in a straight line to avoid the risk of kinked wires causing a malfunction. A clearance of at least 2-inches (5 em) to all sides of the amplifier is necessary not only for proper cooling, but also for gaining access to the inputs and other variable controls. For this reason the amplifier should be mounted in a location which will allow air to circulate freely. To keep your MICRO MINI amplifier running at top performance, choosing the proper location it of utmost importance. If possible, use tubing through grommets.When running power cables through sheet metal, be sure to use grommets to properly insulate the metal edges from the wire insulation. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |